Multi-Trans Metallic FAQs
Start by choosing a topic below
Which paper settings should i use to print on Multi-Trans Metallic?
To print on the Multi-Trans Metallic paper you have to set the paper type to labels or heavy paper.
The print on the paper is brown not black.
Use another paper setting or increase the density of the toner
How much time I need to transfer on mugs?
For Multi-Trans Metallic you need 180 seconds (3minutes)
Important: The timer should not start until the mug has reached the set temperature. If your press does not do this automatically, increase the press time to 4 minutes
When should I seperate the media?
If you remove the transfer while still warm, it will lead to an incomplete and faulty transfer.
- Peel the Transfer Media when absolutely COLD.
Problems with the paper settings "Foil/Transparency"
If the printout looks worse, try it with “lables” or “heavy paper”
FAQs didnt solve your problem?
Here are several ways to contact us
Check out our Downloads page for Transfer Instructions, Printer Manuals & more.